With the rapid development of industrial production mechanization，PUSynchronous beltAlso entering people's sight，Widely used in textiles、Communication cable、chemical industry、metallurgy、Instrumentation、food、Different types of mechanical transmission in various industries such as automobiles，that，Let's take a look togetherPUSynchronous beltWhat are the characteristics and precautions!

  first，PUSynchronous beltThe transmission device consists of an annular belt with equidistant teeth on the inner circumference and corresponding consistent wheels。 Integrated belt drive、Chain drive、Advantages of Gear Transmission。 When rotating，Transmission of power through meshing of tooth profile with the grooves of gears，Usually in-20~ 80Acting at a temperature of。

  PUSynchronous beltHaving the following characteristics。

  1、Having a certain transmission ratio，No slipping during work，Accurate transmission。

  2、Buffered、Damping capacity，Low noise，Stable transmission。

  3、High transmission efficiency，Generally reachable98%，Significant energy-saving effect。

  4、Wide range of transmission ratios，General10，Linear speed reaches50M/S，Transmission power up to several watts to over a hundred watts。

  installPUSynchronous beltPrecautions for timing：

  1、When the distance between two pulleys can be moved，Shorten the distance between centers，installSynchronous beltDistance between centers of rear reset。

  2、When there is a tensioning wheel，Loosen the tensioning wheel first，installSynchronous beltLaterinstallTensioning wheel。

  3、PUSynchronous beltinstallWhen on the pulley，Don't use too much force，Pry the synchronous belt with a screwdriver, etc，To avoid causing the tensile layer of the synchronous belt to break。

  4、PUSynchronous beltDuring transmission，Require high parallelism of the axis of the two pulleys。 otherwise，Synchronous beltWill snake during movement，Or fly out of the pulley。

  PUSynchronous beltmaterial quality：

  1、PUSynchronous beltmaterial quality/material：High quality synthetic chloroprene skeletonmaterialImported high-quality glass fiber cord with toothed surface made of nylon66High elastic fabric，Equipped with various auxiliary materials for different purposes;

  2、PUSynchronous beltmaterial quality/material：Polyurethane afterstrength(Or polyester cord)Polyurethane tooth shape with stretching layer。

  PUSynchronous beltIt is made of steel wire rope or glass fiber as a strong layer，Circular tape with polyurethane or chloroprene rubber on the outer side，The inner circumference of the belt becomes toothed，Engaging with toothed pulley。 Synchronous beltDuring transmission，Accurate transmission ratio，Low axial force，Compact structure，Oil resistant，Good wear resistance，Good anti-aging performance，The general usage temperature is-20―80。

  The above introduction isPUSynchronous beltCharacteristics and precautions，For more informationPUSynchronous beltRelated knowledge of，Feel free to contact us at any time!Customer service is always available online to provide you with services！